Problem with a Sig P220 DAK

[Quantum007]

Short story is after shooting the gun does a fail to feed twice, both times cleared with a tap/rack drill and then the slide locks up. Can't even get it all the way back and when the slide is pulled approx 1/2 way it locks up and you have to hit the rear of the slide on the ground to get it back into battery.

Any Ideas???????

[TAC]

New, used, refinished?

[Quantum007]

Bought new, been used for a few years but less then 2500 rounds through it.

[TAC]

Have you checked the recoil spring, possibly broken?

[JDG]

you have to hit the rear of the slide on the ground to get it back into battery.

Any Ideas???????

When you do this maneuver, where do you stand? Cant picture a safe way of doing this, but your here to tell us the story

[Donzie]

Check the barrel for a bulge. You may have had a squib.

[CoolHandPuke]

you have to hit the rear of the slide on the ground to get it back into battery.

Don't do this. As suggested, check your recoil spring.