travisthared
08-31-2011, 05:52 PM
ITEM REVIEWED: Muzzle brake install/repair on Mak90 by gunsmith
PURCHASED FROM: Ron - American Arms Engineering
COST: $35
PRO'S: Ron was professional and honest. He added two set screws to the brake making for a total of three, creating a secure mount. He also epoxy filled them and you can barely see them. In addition, he cleaned up the brake where it was nicked by the round when it came off.
What I thought was nice was he let me test it out at his place to make sure I was happy. Afterwards we took er back to the bench and Ron did a double check of the install.
This is before...
http://i1201.photobucket.com/albums/bb351/travisthared/mak90_with_break.jpg
These are after...
http://i1201.photobucket.com/albums/bb351/travisthared/mak90_break_on.jpg
http://i1201.photobucket.com/albums/bb351/travisthared/mak90_break_on2.jpg
CON'S: N/A
PURCHASED FROM: Ron - American Arms Engineering
COST: $35
PRO'S: Ron was professional and honest. He added two set screws to the brake making for a total of three, creating a secure mount. He also epoxy filled them and you can barely see them. In addition, he cleaned up the brake where it was nicked by the round when it came off.
What I thought was nice was he let me test it out at his place to make sure I was happy. Afterwards we took er back to the bench and Ron did a double check of the install.
This is before...
http://i1201.photobucket.com/albums/bb351/travisthared/mak90_with_break.jpg
These are after...
http://i1201.photobucket.com/albums/bb351/travisthared/mak90_break_on.jpg
http://i1201.photobucket.com/albums/bb351/travisthared/mak90_break_on2.jpg
CON'S: N/A