PDA

View Full Version : Ultimate Clip Loader for 22lr ruger



execlon
02-17-2012, 04:30 PM
I bought this off amazon and you are suppost to put 50 rounds in it shake and put your clip in and it drops the bullets in your clip instant! i have it for the mark 3 ruger.. I was excited loaded it up and it doesnt work as good as the videos i have seen online. If i pump the clip in and out of it itll load one or 2 at a time but sometimes it drops it in work and jams. Anyone know what im doing wrong? im holding it level as to the indicator on the side

this is the one i got
http://www.amazon.com/gp/product/B004YF931Y/ref=oh_o00_s00_i01_details

Howard000003
02-17-2012, 07:11 PM
I've had 2 so far, they work great once you figure out how to hold them. Keep trying different angles when you hold the loader until you find what works right for your magazines. I hold mine about 45-50 degree angle. Also, make sure the screw on the bottom of the loader is adjusted properly for your magazine length, this effects the loader process, especially of the 10th round.

partdeux
02-17-2012, 10:35 PM
take it apart and clean the channel. Try adding a drop of oil

jimmyp
02-18-2012, 08:12 AM
a short spray of rem oil will make it work 1000 times better, mine will fill up a mag in about 2 seconds.

execlon
02-18-2012, 09:18 AM
looks like i have to try some oil

tigman250
02-22-2012, 08:43 PM
+1 on some lube, mine was a bit sticky at first, a shot of silacone spray and wow what a diffrence!

I wouldn't be without one! Beware, you will be going through alot more ammo now!:pistols:

hendo
02-22-2012, 08:47 PM
There is a level line and I had problems till I figured that out and started holding it level. Afterwards smmoth as silk. If you jam the mags up hard too often it creates a burr inside and you will have to file the burr edge in order to get it going smooth again. FYI

Mi500
02-22-2012, 09:44 PM
mine works quicker than hand loading but not like in videos. i have one mag that works awesome and one that is a pain. i have found the screw on the bottom and lube are crucial.

Howard000003
02-22-2012, 10:14 PM
mine works quicker than hand loading but not like in videos. i have one mag that works awesome and one that is a pain. i have found the screw on the bottom and lube are crucial.

What mags are you using (what gun)? I run Ruger MK II and III 22/45 mags and once I mastered how to hold the loader for the tilt of the mags it works great.

Mi500
02-23-2012, 09:34 AM
What mags are you using (what gun)? I run Ruger MK II and III 22/45 mags and once I mastered how to hold the loader for the tilt of the mags it works great.


mark III 22/45 i think one of my mags needs some more tweaking because messing with the feed lips seemed to help.

upacreek
02-23-2012, 10:12 AM
Been on my Christmas list for a couple of years now...
I'm still waiting...

aaron
02-24-2012, 07:50 AM
I had one and absolutely loved it. My 5yr old would load the mags for me.

agksimon
02-27-2012, 08:37 PM
Try shaking the whole thing up and down, while holding the feed ramp almost vertical. Works for me every time.

Mi500
03-08-2012, 09:23 AM
the other day i sat down and disassembled it. cleaned some waxy crap out of the feed rails and lubed it up. now it works fantastic. seems that the 2 halfs are not as tight anymore but its working great cant wait to take the gun to the range.

NickS
03-08-2012, 10:21 AM
I've still got about four (4) left if anyone wants one. I bring them to the meetings just in case. I bought 12 and have a few left at $16.00 each if interested.

shifty_85
03-09-2012, 05:51 AM
looks cool now i need a .22

bopit
03-09-2012, 08:34 AM
Anyone know if these work with Walther P22's?