PDA

View Full Version : Glock firing pin cups, o-rings



CyborgWarrior
07-20-2008, 06:36 PM
I have a Glock 19 and would like to add the firing pin cup/seals ala "Mariner".

Does anyone have a local source? Any source?
Anyone heard of this?

TFin04
07-20-2008, 06:39 PM
I have a Glock 19 and would like to add the firing pin cup/seals ala "Mariner".


Are you having issues with the factory cups?

www.lonewolfdist.com sells em, if you are intent on buying them.

CyborgWarrior
07-20-2008, 06:42 PM
Are you having issues with the factory cups?

www.lonewolfdist.com (http://www.lonewolfdist.com) sells em, if you are intent on buying them.

No issue, G19 doesn't have them. I want to add them.

TFin04
07-20-2008, 06:44 PM
No issue, G19 doesn't have them. I want to add them.
I'm confused as to why you want to add them.

CyborgWarrior
07-20-2008, 06:50 PM
I'm confused as to why you want to add them.

recommended for "wet" glocks.
I've been meaning to do this for a couple of years.

Tedfs
07-20-2008, 11:03 PM
There's no reason to add them unless you plan on living on or in the water.

TFin04
07-20-2008, 11:45 PM
Cyborg I got an email that you tried to PM me. My box is clear now.

snapper8081
07-26-2008, 08:45 AM
The "wet" spring cups were designed to allow air and water to exit the firing pin chamber more freely to prevent pressure build-up. The standard spring cups will perform the same task but may require more effort on your part.

According to Glock, these spring cups were designed for use in the G17 only. Assuming all the specs relative to the firing pin component on the G19 are the same these cups should work without issue. I am almost positive that the firing pin assembly on the G19 is the same as the G17.

If you are exposing your G19 to water conditions, then consider these cups good insurance for the safety of you and your weapon. Otherwise, I wouldn't spend the $$.