Had new night sights installed. Now it is shooting low like if 12 is just above the sight now it has like a 6. The front post of the sight has to be above what is being hit. Any suggestions
Sent from my SM-G955U using Tapatalk
Had new night sights installed. Now it is shooting low like if 12 is just above the sight now it has like a 6. The front post of the sight has to be above what is being hit. Any suggestions
Sent from my SM-G955U using Tapatalk
What gun and what sights?
Are you saying you now need to cover what you want to hit with the front dot?
What sight's ? What gun?
FPNI
Are these the $35 night sights you bought off ebay from an unknown vendor?
https://www.migunowners.org/forum/sh...is-a-good-deal
Who installed them?
Springfield xdm 4.5
Tru glo tritium
Sent from my SM-G955U using Tapatalk
Installer shouldn't particularly matter....simple drift in/out setup. No height to adjust as they should be "drop in".
Sounds like in his other thread he was going to have Doug do them.
If they ain't fake, then there are primarily 3 likely possibilities. In order of most common first: 1)Shooter issue. 2)Sights have a diff. hold and shoot as intended. 3)Wrong height sights.
Provided it's not some combination of 1-3...
Last edited by Cocowheats; 05-22-2018 at 04:19 PM.
I'm saying I have to cover what I want with below the sight. Like the barrel over what I want
Sent from my SM-G955U using Tapatalk
Like #3?