AR15 light trigger

[DL520]

I have a RRA AR15 M4 that on ocasions while shooting off of a bench shoots off multible rounds.
I believe it may be the trigger being that it breaks at 2lbs. Is there anything I can do with the existing trigger to
add a couple of pounds to it or should I just get a new one?

[I1I1I11II]

Hold the trigger to the rear. It's double tapping because you are not holding the trigger to the rear after the pull, I bet.

[red442joe]

Essentially, bump fire.
Hey, ain't you supposed to turn those in??
However, you don't say if you have modified the trigger;
2 lbs. doesn't sound like stock type parts.

Joe

[I1I1I11II]

There's a number of manufacturers that have 2# triggers.

[DL520]

Yes Im sure thats what is going on. And for the most part it does not get fired with a bipod on the bench, cause that is the only time that happens.
I bought it used from a gun shop, dont know if it had been messed with. I would still like the trigger to be 4 or 5lbs. Any suggestions?

[I1I1I11II]

Find the trigger you want. If you can't put it in, I will help you.

I might even buy the other trigger off you depending on what it is. Sounds like an elf.

[I1I1I11II]

However...

You can mitigate this by simply getting used to riding the reset...

https://www.pewpewtactical.com/trigg...ing-the-reset/

[DrScaryGuy]

I'll be happy to trade you a milspec trigger and hammer

[I1I1I11II]

Lol me too!

[Omni]

Double check your hammer spring. I've mistakenly put one in backwards and had similar results.