So i just bought a Ruger LCRx and the cylinder on them are stainless so I want to remove the black coating, leaving it matte stainless for a two-tone look. Is there any easy way to do that yourself if you don't own a media blaster or tumbler?
So i just bought a Ruger LCRx and the cylinder on them are stainless so I want to remove the black coating, leaving it matte stainless for a two-tone look. Is there any easy way to do that yourself if you don't own a media blaster or tumbler?
If you have an air compressor, go to HF and buy the gravity blast gun with the red hopper. Then, go to TSC and buy the big bag of coal slag abrasive for $8. Do it outside with face protection. Done.
I have a small media blast cabinet and aluminum oxide (120 mesh) and glass bead abrasives. You are welcome to stop by one day and use the cabinet if you wish.
Life is too serious to take too seriously.
DISCLAIMER: The opinions expressed in my posts are my own and do not necessarily reflect the opinions, views, or official policies of Michigan Gun Owners.
NRA Certified Range Safety Officer
Celebrate Recovery! Member & Group Coach
I will be interested in seeing before & after pictures of this project.
Just because something is legal to do doesn't mean it is the smart thing to do.
Only want to do it is probably chemically with airplane stripper might work but do not reinvent the wheel. Talk to rifle guy.
take rifleguy up on his offer, even if you decide to buy a different media like walnut shells etc. I hear AO is great and preferred in many gun finish situations.
That's probably what I'll do in the near future. I was very happy to get such a generous offer.
What media would people suggest for blasting the black off a stainless steel cylinder?
Ruger does a lot of their stainless coloring by CVD or PVD coating in their Prescott facility. If the black finish on your cylinder is vapor deposited CrN, it will be extremely difficult to remove by blasting. The commercial vapor deposition guys remove these coatings by charged plasma stripping in vacuum furnaces, which is not an option for the home hobbyist.