HaVE had the red bore sight for a long time now. The switch is toast, so I bought a new green one. I HATE the adaptors & the screws that came with the new one. They are close to being right, except for the screw. They are just a tad bit smaller. Would it be possible to re-tap the threads since it's TINY & probably the next size. I truly like the head on these screws. they have an allen type head & the others are phillips. Have found the slotted & the phillips, but not the allen.
My first stop was Northside Hardware in Wayne. That place is like a museum. Would a gun store like Top Gun that has a Smith be a better choice ? I would REALLY like to get the laser tapped.
Results 1 to 4 of 4
Thread: BOREsighter
-
10-23-2018, 10:47 PM #1MGO Member
- Join Date
- Dec 2010
- Location
- NEAR METRO AIRPORT
- Posts
- 7,035
BOREsighter
ΥΣΜΧ SEMPER FIDELIS !
LIFE MEMBER OF THE WORLD'S LARGEST FRATERNITY
71 AND COUNTING
-
10-24-2018, 07:14 AM #2MGO Member
- Join Date
- Jul 2005
- Location
- the dog house
- Posts
- 10,676
Gun smith should be able to tap your bore sighter, so should any machine shop. Is it going to be cost effective though?
"Saepe errans, numquam dubitans --Frequently in error, never in doubt".
The trouble with the Internet is that it's replacing masturbation as a leisure activity. ~Patrick Murray
-
10-24-2018, 07:07 PM #3I am a Forum User
- Join Date
- Oct 2015
- Posts
- 6,148
post pics of what you had, then what you just bought. Or link to it on amazon etc if its still available.
I think mostt of them are under 50-60 bucks, so I would search more for the same unit you liked in the past, I bet its still made.
-
10-24-2018, 07:37 PM #4MGO Member
- Join Date
- Apr 2015
- Posts
- 669
Reply With Quote
Posting Permissions
|
