Thanks for all the suggestions. I really like the idea of milling out a slot and installing a different type of wood. It will be a good winter project and will post a pic when finished.
Thanks for all the suggestions. I really like the idea of milling out a slot and installing a different type of wood. It will be a good winter project and will post a pic when finished.
Another possibility.... mill out the damaged area, smooth and sand the resulting slot, then place a couple case heads removed from spent cartridges in the slot... polish them first. Fill the slot with clear epoxy/resin.
Last edited by RifleGuy; 12-20-2018 at 02:27 PM.
Life is too serious to take too seriously.
DISCLAIMER: The opinions expressed in my posts are my own and do not necessarily reflect the opinions, views, or official policies of Michigan Gun Owners.
NRA Certified Range Safety Officer
Celebrate Recovery! Member & Group Coach
Numrich has both new and used rem 721 stocks on there website