On a recent rage trip my G43 which has had 200-300 rds through it no problem started FTF every other strike. I should have checked the brass for light strikes but forgot to. Has anyone had this experience?
TIA
Results 1 to 10 of 11
Thread: G43 FTF
-
08-27-2019, 03:35 PM #1MGO Member
- Join Date
- Apr 2013
- Location
- SE Oakland County
- Posts
- 1,652
G43 FTF
-
08-27-2019, 04:31 PM #2MGO Member
- Join Date
- Feb 2009
- Location
- Okemos, MI
- Posts
- 3,259
Any aftermarket parts installed?
-
08-27-2019, 06:18 PM #3I am a Forum User
- Join Date
- Aug 2011
- Location
- West Michigan
- Posts
- 1,154
Have you oiled it?
-
08-28-2019, 06:15 AM #4MGO Member
- Join Date
- Apr 2013
- Location
- SE Oakland County
- Posts
- 1,652
It is all original and was just cleaned and oiled.
-
08-28-2019, 07:08 AM #5MGO Member
- Join Date
- Feb 2009
- Location
- Okemos, MI
- Posts
- 3,259
Originally Posted by kryl
Not normal at all. Either bad ammo, too much oil in striker channel, chipped or worn striker.
-
08-28-2019, 02:02 PM #6MGO Member
- Join Date
- Apr 2013
- Location
- SE Oakland County
- Posts
- 1,652
I'll check that, thanks! Originally Posted by DLL9MM
-
08-28-2019, 02:12 PM #7MGO Member
- Join Date
- Feb 2009
- Location
- Okemos, MI
- Posts
- 3,259
I doubt it’s the striker spring with such a low round count.
-
08-30-2019, 04:52 PM #8MGO Member
- Join Date
- Feb 2016
- Location
- Hartland
- Posts
- 1,865
Factory or reload ammo? Originally Posted by kryl
Never, under any circumstances, consume a sleeping pill and laxative on the same night.
-
08-30-2019, 05:33 PM #9MGO Member
- Join Date
- Feb 2009
- Location
- Okemos, MI
- Posts
- 3,259
If you are ever close to South Lansing Sat-Mon, I have at least 2 certified armorers at my shop that would be willing to look at it for you.
-
08-31-2019, 07:21 PM #10MGO Member
- Join Date
- Apr 2013
- Location
- SE Oakland County
- Posts
- 1,652
Federal HST factory. Same stuff I have been shooting in it since day 1 Originally Posted by AxlMyk
Reply With Quote
Posting Permissions
|
