One more internal brace to put in, but I'm calling prototype 1.0 done.
20200517_081322.jpg
20200517_081339.jpg
Cost: 79.50
+ portion of stain/poly/paint I had on hand
+ screws
- leftover wood
Last edited by Einthewoods; 05-17-2020 at 07:42 AM.
Thanks. Glad this thread came along or I probably wouldn't have thought to look at one of these.
Biggest cost was the plywood I used in the back and front and then the hooks.
Biggest pain was making the stencils and then painting the letterson. It took every bit of patience I had.
I'll add another bracing board inside for wall mounting and it'll let me hang a handgun as well.
Dimensions are 40x14x5 internal.
All done. Got it mounted and the gun inside. You can tell it’s budget, and nothing about it is perfect, but for under $100 I’m totally fine with that. PM for unedited picture, whole thread doesn’t need to know my name hah