Hello everyone, I purchased a SIG P365X (Red dot model) last week and took it to the range today to run some rounds through the gun and zero the optic. I fired 212 rounds through the gun, 50 124g CCI Blazer aluminum, 100 115g Winchester White Box, 50 Federal 124g, and 12 Speer Gold Dot 124+ P. I lubed the gun prior to the range trip.
Both myself and my wife shot the pistol, My wife had roughly 25 failures where pistol would fire and when the slide reciprocated it would feed the bullet about 95% of the way into the chamber but fail to go fully into battery. Just a very light tap on the rear of the slide would seat it fully and then the gun would fire.
I've read some reports online of people having problems with the Sig having return to battery failures. Has anyone experienced this? I have the regular 365 model and haven't had any issues with it.